€143.26
€180.19
  • €12.36
  • Délai de livraison: 1-2 days
  • Disponibilité: En stock
  • État du produit: new

Productbeschrijving

The Hertz Cento CK 165 L is a 6.5-inch (16.5 cm) Speaker Set with a passive 2-way crossover.
It includes the C 26 Tweeter with a 26 mm Tetolon diaphragm and a 20 mm voice coil, as well as the CK 165 L mid-bass driver with a non-pressed paper diaphragm, a 25 mm voice coil on an aluminum carrier, and a neodymium magnet with low-carbon pole plates.
The CCX 2T and CCX 2W crossovers are separate and ultra-compact, and the high-frequency level is adjustable in three steps.
Performance data: 100 W RMS, 300 W Peak, 4 Ohm impedance, sensitivity of the Tweeter 92 dB and the mid-bass driver 91 dB, frequency response 50 to 22.5 kHz.
The filters operate at 3.8 kHz with 6 dB/Oct (LP) and 12 dB/Oct (HP).
Additional features include FEM-optimized faceplate geometry, a compact 3-spoke chassis with rubber protection for the magnet, and a metal Speaker Grille in a plastic frame.
Features 6.5-inch (16.5 cm) Speaker Set RMS power 100 W Peak power 300 W Impedance 4 Ohm Frequency response 50–22.5 kHz Sensitivity of Tweeter 92 dB SPL Sensitivity of mid-bass driver 91 dB SPL C 26 Tweeter with 26 mm Tetolon diaphragm Tweeter voice coil 20 mm Neodymium magnet on the Tweeter FEM-optimized faceplate geometry Installation accessories CK 165 L mid-bass driver with non-pressed paper diaphragm Mid-bass driver voice coil 25 mm on aluminum carrier Neodymium magnet with low-carbon pole plates on the mid-bass driver Compact 3-spoke basket, rubber protection for the magnet Metal Speaker Grille with plastic frame Separate, ultra-compact crossovers CCX 2T and CCX 2W High-frequency level adjustable in three steps (-2, 0, +2 dB) Low-loss components, pure copper coils Passive 2-way crossover design Technical Specifications Crossover filter: LP 6 dB/Oct at 3.8 kHz, HP 12 dB/Oct at 3.8 kHz Tweeter diaphragm 26 mm Tweeter voice coil Ø 20 mm Mid-bass driver voice coil Ø 25 mm D 131.5 mm Re 3.2 Ohm Fs 60 Hz Le 0.23 mH Vas 13.66 l Mms 14.2 g Cms 0.52 mm/N BL 4.9 Tm Qts 0.60 Qes 0.70 Qms 3.8 SPL 91 dB Weight of Tweeter 0.037 kg Weight of crossover 0.037 kg

Relevant Products

Loading...